Xi’an Dechuang Electrical Technology Co., Ltd.
中文     English    
  News  
Industry News
Company News
Site Notice
  联系我们  
公司总机
029-88609367
029-88606479
雷达物位计专线
029-89196814
029-89288673
 
Industry News
120GHz FMCW Radar level meter be used in the level measurement of chemical reaction
Views:   ·  source:Xi’an Dechuang Electrical Technology Co., Ltd. ·  author:西安德创电气科技有限公司 ·  Release date:2021-04-27 15:49:00

120GHz FMCW Radar level meter be used in the level measurement of chemical reaction


There are many types of equipment in the chemical industry, huge quantities, and complicated controls. Highly corrosive acids, basessome flammable and explosive chemicals are generally used in its raw materials. Therefore, whether it is a storage tank, or the reaction equipment includes a reaction kettle, pot, and tower heat ex-changer , Heating furnace, etc., the safety requirements of the equipment are very high. As a liquid level measuring instrument installed on a storage tank or a reaction kettle, the liquid level gauge also faces technical performance challenges in the face of the complex structure and severe working conditions of equipment in the chemical industry.


Our DCRD1000B series, 120GHz FMCW radar level gauge, is especially suitable for high temperature and pressure reactors, strong dust, steam, foam fluctuations, storage tanks with special heating rods and other special process tanks, with unique advantages.


1)Technical parameters and project site conditions

Production workshop of a chemical company for the measuring medium: Chlorinated paraffin, Range: 2.8 meters, Process connection: DN65mm PN15.


On-site working conditions: The working conditions of this reactor are complicated. The temperature is 90 ° C. A large amount of chlorine gas enters when the reactor is fed, which reflects that a large amount of steam and foam will be generated. Due to the high foam thickness (about 800mm), the instrument echo Weak or no echo signals affect liquid level measurement.


2)Measurement process data of install DCRD1000B 120Ghz FMCW radar level

After the installation of DCRD1000B, the test time lasts 4 days, and the meter data (echo curve and history curve) are taken daily. The meter automatically records the historical curve, and through analysis and judgment, to ensure that the meter works normally.

3)Measurement results and analysis of Radar level sensor


After field testing, the 120G FM radar level gauge solved a lot of difficult problems in foam conditions and other instruments that were difficult to measure accurately, demonstrated the reliability and stability of the instrument under complex conditions, and achieved satisfactory measurement results for users.


In the end, our company's DCRD1000B, 120G FM continuous wave radar level gauge was successfully applied to the chemical project, and the signal was good, ensuring the normal operation of the plant.


If you are interested, please feel free to contact us!!! 

 
Copyright © 2022 Xi’an Dechuang Electrical Technology Co., Ltd. All Rights Reserved.
Address: 3-10401, East Zone, Modern Enterprise Center, No.2 Zhangba Wu Road, Yanta District, Xi
Phone: 86-29-88606479    Email: xadckj@163.com