Production Overview
Intelligent electromagnetic flowmeter DCFL3000A1 is a fully intelligent electromagnetic flowmeter developed by our company using the most advanced technologies at home and abroad. The core of the Chinese electromagnetic converter uses a high-speed central processor. The calculation speed is very fast, the precision is high, and the measurement performance is reliable. The converter circuit design adopts international advanced technology. The input impedance is up to 1015 ohms. The common mode rejection ratio is better than 100db. For external interference and 60Hz/50Hz interference suppression ability is better than 90db. It can measure the fluid flow of lower conductivity. The sensor adopts non-uniform magnetic field technology and special magnetic circuit structure, the magnetic field is stable and reliable, and the size is greatly reduced, the repetition is reduced, and the characteristics of the flowmeter are small. It is our company's tenet to make customers "buy at ease, use at ease, and service satisfactory".
Technical Index
Nominal diameter: DN25mm~DN2600mm
Measurement accuracy: 0.5 level, 1.0 level
Flow direction: positive and negative net flow; range ratio: 150:1; repeatability error: ±0.1% of measured value
Working pressure: DN6-DN80: ≤1.6MPa, DN100-DN250: ≤1MPa; DN300-DN1200: ≤0.6MPa (pipeline) high pressure can be customized
Medium temperature: -40℃~180℃
Relative humidity: 0~95%RH
Power supply: 85~265V, DC24V
Signal output: 4mA~20mA/HART/RS485
Explosion-proof grade: Exd ⅡCT6 Gb
Protection level: IP67